Product Description

Custom Permanent Mold Casting Manufacturers. Permanent mold casting of aluminum casting is a metal casting process. The process of sand casting is an expendable, its mold will be destroyed after each cycle. The molten aluminum liquid is poured in a mold which is clamed shut until they cools and solidifies into the desired part shape. The mold will be destroyed when you move out the parts from its mold.

Product Detail

Custom Permanent Mold Casting Manufacturers.

We've one of the most advanced generation tools, experienced and qualified engineers and workers, recognized good quality manage systems and a friendly skilled product sales workforce pre/after-sales support for Factory Cheap China OEM Precision Permanent Mold Casting, We sincerely assume exchange and cooperation along with you. Let's move forward hand in hand and achieve win-win problem.
Factory Cheap China Casting Part,  Permanent Mold Casting, As a well educated, innovative and energetic staff,we're responsible for all elements of the research, design, manufacturing, sales and distribution. With studying and developing new techniques,we've been not only following but also leading the fashion industry. We listen attentively to the feedback from our customers and offer instant communication. You will instantly feel our expertise and attentive service.



Permanent mold casting of aluminum casting is a metal casting process. The process of sand casting is an expendable, its mold will be destroyed after each cycle. The molten aluminum liquid is poured in a mold which is clamed shut until they cools and solidifies into the desired part shape. The mold will be destroyed when you move out the parts from its mold.

Permanent mold casting uses a metal mold (die) that is typically made from steel or cast iron and can be reused for several thousand cycles. Because the molten metal is poured into the die, permanent mold casting is usually used in gravity die casting and low pressure die casting.

 

Permanent mold casting is typically used for high-volume production of small, simple metal parts with uniform wall thickness. Non-ferrous metals are typically used in this process, such as aluminum alloys, magnesium alloys, and copper alloys. Common permanent mold casting parts include gears and gear housings, pipe fittings, and other automotive and aircraft components such as pistons, impellers, and wheels.

 


The permanent mold casting process consists of the following steps:


First is the mold design. To get good parts, the mold have to be designed very different according to different shape and demand, like the different quantity of sprues, the dimension of sprues and so on. Pls contact us for more details.

Second is mold assembly - The mold consists of at least two parts - the two mold halves and any cores used to form complex features. If the mold core can be move out directly, expendable sand cores are sometimes used.

after the mold was installed on low pressure die casting machine, it need to be pre-heated to around 300-500°F (150-260°C) to allow better metal flow and reduce defects. Then, a ceramic coating is applied to the mold cavity surfaces to facilitate part removal and increase the mold lifetime.


Pouring - The molten metal is poured at a slow rate from a ladle into the mold through a sprue.The metal flows through a runner system and enters the mold cavity. The molten metal is allowed to cool and solidify in the mold during the suitable time. Then open the movable part, and move off the casting.

Close the mold and begin another casting with this mold. It can be used large time, so it called permanent mold casting.

 



Product Categories

Featured Products

Navigation